27.69 VAT not included

GLASSBEND features:

92% light transmission, so very bright

Strong and flexible

Very good interlayer adhesion

No crazing when bent

Food Contact Acceptable

Almost no ”warping”

    Categories: , SKU: N/A


    GLASSBEND is a crystal clear, strong, flexible and easy to print filament for 3D printing. These characteristics, together with the high degree of gloss, very low water absorption, practically no shrinkage or warping, very good interlayer adhesion and flame retardant properties make it a very special filament. The material is FCA (Food Contact Acceptable) approved. In short, a very diverse filament which can be used for many applications.

    Additional info:

    Recommended temperature for heated bed is ± 70-90˚C. Adhesion is possible on different surfaces.
    GLASSBEND can be used on all common desktop FDM or FFF technology 3D printers.


    Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.

    Physical Properties

    DescriptionTestmethodTypical value
    Specific gravityISO 11831,01 g/cc
    MFR 200˚C/5kgISO 11337,5 g/10 min
    Tensile strength at breakISO 52726 Mpa
    Strain at breakISO 527230%
    Flexural modulusISO 1781795 Mpa
    Instr. Dart Impact
    (23˚C, 3,18mm TE)
    ASTM 376340,0 J
    Shore HardnessISO 86863 D
    Light TransmissionASTM D100392%

    Thermal Properties

    DescriptionTestmethodTypical value
    printing temp.DF260±10˚C
    melting temp.ISO 294205±30˚C
    vicat softening temp.ASTM D152585˚C