Showing 1–16 of 129 results

3D LAC

5.78 VAT not included

Its function is to keep the first plastic layer to keep the start of printing stable, avoiding undesirable errors. 3DLAC is the perfect substitute for Kapton tape and other types of fasteners due to cost savings and easy application. A light 3DLAC fog on the surface is sufficient to completely maintain the first plastic layer at the base.
Thanks to the properties of 3DLAC, while the base is hot, the extruded plastic is firmly stuck. Once the printed part cools, it can be removed gently and without damage.

Double adhesion without smell.

Aluminium Filamet

260.85 VAT not included

Aluminum Filament contains around 65% metal. Filamet™ enables any Fused Filament Fabrication 3D printer to produce metal objects. Once fired in a kiln, the result is 100% metal.

Size: 1,75mm

Weight: 0,5kg

Ash Gray resin (AG)

61.96 VAT not included

Ash Gray resin is one of the resins that will best show the details of your printed pieces. Volume of 1 liter capacity. The useful life of the resin is approximately 1 year. Store the product in an environment between 10ºC and 25ºC. An environment of excessive heat will prematurely polymerize the resin. Resin that has not cured in an impression can be reused for later printing.

Borosilicate Glass

7.4356.07 VAT not included

3 mm thick Borosilicate glass with good thermal composition to withstand high heatable bed temperatures and good adhesion to all types of 3D printing materials.

Bronze Filamet

107.67 VAT not included

Bronze Filament contains around 87% metal. This metal filament Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a kiln, the result is 100% metal.

Castable Blend resin

72.46 VAT not included

The Castable Blend resin from Fun To Do has been specifically created to cast pieces in bronze, copper, tin or iron using a standard casting process. It is the ideal resin for casting art pieces, toy designs, machinery parts. The resin, once fully cured, has a shore hardness of 73 D. Castable Blend resin is available in Red color. Instructions to optimize the process of Casting by lost wax with Castable Blend resin * Preheat the oven to 850 degrees Celsius * 30 minutes after mixing the material to be melted (investment), place the mold directly in the hot oven * Hold at 850 degrees Celsius for 1 hour and 30 minutes. * Then, lower to 485 degrees Celsius as fast as the oven allows. * Keep at 485 degrees for 15 minutes and strain.Volume of 1 liter capacity.The shelf life of the resin is about 1 year. Store the product in an environment between 10ºC and 25ºC. An environment of excessive heat will prematurely polymerize the resin. Resin that has not cured in an impression can be reused for later printing.

Copper Filament

83.74 VAT not included

Copper Filament contains around 90% metal. Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a kiln, the result is 100% metal.

 

Deep Black resin (DB)

67.21 VAT not included

With the Deep Black resin you will have a very high resolution and will look like just out of an injection mold. The maximum contraction that your pieces are going to present is only 0.5% .Deep Black is the ideal resin for your artistic prints, your printed figures will always keep a black color, even in its finest details, and they will not present any discoloration. All this thanks to the application of pigmentation at the level of nanoparticle. The resin, once completely cured, has a shore hardness of 81 D. The Deep Black resin is available in Black color.Volume of 1 liter capacity.The shelf life of the resin is about 1 year. Store the product in an environment between 10ºC and 25ºC.

An environment of excessive heat will prematurely polymerize the resin. Resin that has not cured in an impression can be reused for later printing.

Dentifix-3D resin HR

99.22 VAT not included

The Dentifix-3D resin is expressly designed and created to manufacture dental models. The maximum contraction that your pieces will present is only 0.2%. The resin, once completely cured, has a shore hardness of 81 D .The Dentifix-3D resin is available in matt Beige RAL1002 – Yellow Sand and in Gray color. Volume of 1 liter capacity. The useful life of the resin is about 1 year. Store the product in an environment between 10ºC and 25ºC. An environment of excessive heat will prematurely polymerize the resin. Resin that has not cured in an impression can be reused for later printing.

Electric oven of 1400ºC for sintering

4,550.0011,251.20 VAT not included

An electric oven of 1400ºC for sintering will provide excellent temperature uniformity. It has a 30-segment PID programmable temperature controller that is easy to use, which allows controlling the heating rates, stops (waiting times) and cooling rates. Limited warranty of one year in all electronic parts.

High Carbon Iron Filament

86.58 VAT not included

High Carbon Iron Filament contains around 80% metal. Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a sintering furnace, the result is 100% metal. High Carbon Iron Filamet™ is highly ferromagnetic both before and after sintering.

Industrial Blend resin (IB)

61.96 VAT not included

The Industrial Blend resin has been created specifically for those industrial customers that need an extra hard resin and that maintains its structural integrity when exposed to extreme temperatures. It has been tested in a range from -45ºC to + 225ºCDebido due to these properties, Industrial Blend resin is one of the few existing resins on the market that is perfect for vulcanization of printed parts. The Industrial Blend resin can also be used to print molds and perform vulcanization directly in the mold for those metals with relatively low melting temperatures (such as tin or pewter). The resin, once fully cured, has a shore hardness of 75 D.

Kit of pigments 20ml

15.22 VAT not included

With the kit of pigments of Fun To Do you can add the color you want to your printed pieces, you just have to mix the Snow White resin with the pigment you need from the available ones (Yellow, Blue, Black and Red) or even make the mixture with all of them Your pieces will have a personalized and unique color !! Each bottle contains 20ml of pigment (with an approximate weight per jar of 30gr).